Novexx Solutions ALX 92x, Service Manual, Page: 629 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
107
Speed Adaption
ALX 92x DPM
Aktivieren der Geschwindigkeits-Adaption (APSF)
On
The dispensing speed adapts automatically to match the speed of the con-
veyor belt.
Prerequisites:
•
APSF kit installed
•
Rotary encoder installed
•
The following parameters must be set to match the applied rotary encoder:
– DISPENSER PARA > Encoder Type
– DISPENSER PARA > Encoder Resol.
– DISPENSER PARA > Encoder Diameter
Off
(Default setting) The dispensing speed remains constant, at the value that
was set using parameter
PRINT PARAMETERS > Print speed
.
Encoder Type
ALX 92x DPM
Type of rotary encoder used.

Only if DISPENSER PARA > Speed Adaption = „On“
Single Phase (Default setting) Setting for single phase rotary encoder
2 Phases normal Setting for normal 2 phase rotary encoder
2 Phases invert.
Setting for inverted 2 phase rotary encoder
Encoder Resol.
ALX 92x DPM
Resolution of the rotary encoder used.

Only if
DISPENSER PARA > Speed Adaption
= „On“
xxxx Setting range: 0,0 bis 9999 pulses/turn; Default setting: 500
Encoder Diameter
ALX 92x DPM
Diameter of the measuring wheel at the rotary encoder used.

Only if DISPENSER PARA > Speed Adaption = „On“
xxx,x
Setting range: 0,0 bis 200,0 mm; Default setting: 64,0
200.0 mm 20.6 var