Novexx Solutions ALX 92x, Service Manual, Page: 621 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
99
Supervisor
As setting „User“, with different valid key codes:
•
Valid key codes: Supervisor, Production
User auto start (Not with AP 4.4) Printer starts without password interrogation. Only the
menus
PRINT INFO
and
SERVICE DATA
are accessible.
Realtime clock
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
The realtime clock provides actual date and time. Those data can be pro-
cesses using the Easy-Plug #YC, #YS or #DM commands.
Setting date / time:
1. Press the CUT (Apply) button repeatedly, until the digit blinks which you want
to alter.
2. Set the intended value to the digit by pressing the FEED button (repeatedly).
3. Repeat steps 1 and 2 until date / time is set correctly.
4. Press the ONLINE button.

Press the ESC button to leave the parameter without altering the setting.
Material feed
ALX 92x DPM
Suppresses backwards material feeding.
For-/backwards Standard setting; material is fed forwards and backwards.
Only forwards The label material is only fed forwards. Printjobs, which contain commands
for using R 1:1 or N 1:1 mode, are automatically printed in batch mode. The
batch mode is modified in a way, that the label following after a printjob is not
drawn back under the printhead, but is ejected in forward direction. The effect
is, that one label stays unprinted between two succeeding printjobs.
Realtime Clock
dd.mm.yyyy hh:mm dd=Day, mm=Month, yyyy=Year, hh=Hour,
mm=Minute (Example: 19.02.2001 14:41)
Print mode Feed direction following label
„for-/backwards“ „Only forwards“
Batch <--> -->
R 1:1 <--> Batch
a
a) The backwards movement is suppressed during
initialization.
N 1:1 <--> Batch
a
[12] Suppression of the backward movement with the setting „Only forwards“.
<--> = Material feeding in both direction; --> = Material feeding only forwards.