Novexx Solutions ALX 92x, Service Manual

Page: 597 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
75
#VW/I Interface
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Defines the output interface belonging to the Easy-Plug command #VW/I.
Easyplug
(Default) Interface that is defined in
INTERFACE PARA >EASYPLUGINTERPR >
Interface as input interface for print data.
Serial Com1 Serial interface Com 1.

Only available for selection, if the interface is not occupied by another
function.
USB
USB interface

Only available for selection, if the interface is not occupied by another
function.
TCP/IP SOCKET Ethernet interface

Only available for selection, if the interface is not occupied by another
function.
Serial Com3 Serial interface Com 3.

Only available for selection, if the optional I/O board is installed and if the
interface is not occupied by another function.
> DRIVEASSIGNMENT

For detailed information read the Easy-Plug manual, topic section General
Notes, Definitions and Command Overview
 , chapter „Drive names“.
Drive C
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
Assigns drive letter C: to one of the card slots.
Assigns drive letter C: to the card slot or to the USB port.
None
C: is not assigned
CompactFlash
(Default for CPU boards up to index A6621-06) C: is assigned to the standard
CF card slot (left slot at the 64-xx)
SD card (Default for CPU boards with index A6621-07 or higher ) Assigns drive letter
C: to the SD card slot
(Default setting) C: is assigned to the SD card slot.
USB-stick
C: is assigned to the USB host port.
Drive E
64-xx ALX 92x DPM PEM ALX 73x (PMA)

Only with CPU boards up to index A6621-06
Assigns drive letter E: to one of the card slots or USB ports.