Novexx Solutions ALX 92x, Service Manual, Page: 580 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
58
Data synch.
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Data synchronisation at the serial interface.
RTS/CTS
Data synchronisation through hardware
XON/XOFF Data synchronisation through software
None Handshake signals are ignored
Frame error
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Display (Default) An error message is displayed, if a framing error is detected while
the printer is receiving serial data.
Ignore
Framing errors will be ignored, no error messages are displayed.
> COM 2 3 PORT

This menu only appears, if the optional I/O board is installed.
Baud rate
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4
AP 5.6

With mounted and connected I/O board only.
Speed of data transfer using the serial interface.
xxxxxx Baud
Setting range: 2400 to 115200 Baud; Unit interval: 2400/4800/9600/19200/
38400/115200 (default)
No. of data bits
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4
AP 5.6

With mounted and connected I/O board only.
The number of data bits is always 8.
Parity
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4
AP 5.6

With mounted and connected I/O board only.
Defines the parity check of serial transmitted data.