Novexx Solutions ALX 92x, Service Manual

Page: 489 / 824

05/16 Rev. 06 SERVICE MANUAL Applicator Interface
ALX 92x – ALX 73x Interface description
13
Interface description
Important notes
The Applicator Interface (AI) is an option board for the ALX 92x. The AI works
as a mini-PLC, which can control almost any applicator type. The AI is availa-
ble in two Versions:
•
AI Basic : power supply via the ALX 92x main power pack
•
AI Pro : higher output currents due to a separate power pack (only with
ALX 92x )

„Basic“ and „Pro“ is only mentioned in this description, if the two versions
are different in something.
Connectors
Required connectors: The „AI connector kit“, Article no. A5069, contains (con-
nector and connector housing for each):
•
1x D-Sub 15 high density
•
1x D-Sub 26 high density
•
1x D-Sub 44 high density
Firmware requirements
Both firmware versions, for ALX and Applicator Interface must match the table
below:
Anzeige der Firmware-Versionen:
SERVICE DATA >MODULE FW VERS.
Firmware ALX 92x ALX 73x (PMA) Firmware AI
Gen. 2 Gen. 3
3.40 — 1.03
4.00 — 1.11
4.10 — 1.15
4.11/4.22
5.00/5.01/5.02/
5.03
1.17
4.31 5.31 1.19
4.33 5.33 1.23
-- 6.35 6.36 1.36
-- 6.37 1.36
-- 6.42 1.38
-- 6.43 1.38
-- 6.52 6.52 1.41
-- 6.60-SR1 6.60 1.42