Novexx Solutions ALX 92x, Service Manual

Page: 196 / 824

07/15 Rev. 02 SERVICE-HANDBUCH Reading out diagnosis data
DPM – PEM – ALX 92x
7
Reading out via serial interface
Prerequisites
• Firmware (at least):
• Terminal program, e. g. „Hyperterminal“ (is deliver-
ed with Windows operating systems).
Carrying out
1. Connect the machine to a PC, using the serial inter-
face. Set the transfer parameters to 115 kB, n, 8, 1
(default setting).
2. Start Hyperterminal.
The window „Connection Description“ [1] opens.
3. Name the new connection [1A]. Click OK.
The window „Connect“ opens.
4. Select the serial port of the PC and click OK.
The window „COM1 Properties“ [2] opens (if COM1
was selected).
5. Set the transfer parameters to
115 kB, n, 8, 1 and click OK.
The Hyperterminal main window opens.
6. Open the menu „Transfer“ and click „Record Text“
[3]. An input window opens.
Enter the file name for the record file and click
„Start“.
7. At the machines operation panel press all four but-
tons simultaneously.
This starts data being read out of the printing device
and being displayed in the Hyperterminal main
window [4]. At the same time, the data are saved in
the record file.
8. To stop the transmission, click „Cancel“ in the menu
„Transfer > Record text...“.
Generating further record files:
 Close Hyperterminal and start new.
Hardware Firmware
Electronics Gen. 2 4.22
Electronics Gen. 3 5.02
[1] Enter a name (A) for the new connection.
[2] Set the transfer parameters.
[3] Hyperterminal main window.
A