Novexx Solutions ALX 92x, Service Manual, Page: 111 / 824

04/16 Rev. 06 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
36
Verifying Bar Codes with OLV
System Requirements
Printer
• Suitable printers: 64-xx / DPM / PEM / ALX 92x.
• Printer firmware: at least version 3.30

With firmware v. 3.30, the OLV can only be connected to Com2, that is, the op-
tion board A2294 must be installed in the printer.
OLV
• SV100 with power supply, interface cable and mounting plate.
• Firmware version: X302
• Manufacturer: RJS
www.RJS1.com

• Serial data cable (1:1) to connect printer and OLV.
• For use outside of the USA, a country specific power cable is required.
Functional Description
An OLV is a bar code scanner, which is able to rate the scanned bar code in quality
(according to ANSI grades). The OLV is placed in front of the printer, so that it can read
the bar codes directly after printing [21].

Only the OLV „SV100“ by RJS can be used.

Only bar codes can be verified, which are printed with a rotation of 0° or 180°.
Part Order # (RJS)
Scanner/OLV 002-7973
Installation kit with PC software and
power supply
002-8107
Mounting plate with scanner brac-
ket
002-4608
[Tab. 24] Ordering numbers of the manufacturer for the SV 100.
Cable Order # (Novexx)
Serial cable A1207
Power cable euro norm 90600
Power cable UK A0635
Power cable switzerland A0842
Power cable denmark A3598
[Tab. 25] Accessories for the SV 100 available at Novexx Solutions