Novexx Solutions ALS/XLS 204, Service & Installation Manual, Page: 242 / 312

Service Manual
ALS/XLS 20x/256/272
02/2019 | 04 242
Repair
TESTS
Sensor test
 Call the
SERVICE/DIAGNOS. > Sensor Test
function.
– Display:
alternating with:
– 00.01 = Identification number of the sensor
– 1 = value currently being transmitted by the sensor “Labels”
 Press the button to change to the next sensor in the list
 Press the button to change to the preceding sensor in the list
Sensor Test
00.01 1
Sensor Test
Labels. 1
Sensor ID Name Value Test
00.01 Labels.
(Label sensor)
1 or 0 Move label material through the sensor; a gap
between labels (punch) must cause a change
between 1 and 0. If no change takes place:
 Adjust the sensor (
MACHINE SETUP > Sensor
Adjust
)
00.02 Starts.
(Photoelectric product sen-
sor)
1 or 0 Breaking the light beam must cause a change
between 1 and 0.
00.03 Capaci.
(capacitive label sensor)
1 or 0 Move label material through the sensor; a gap
between labels (punch) must cause a change
between 1 and 0.
00.04 Diamet.
(external photoelectric RD
sensor)
1 or 0 Breaking the light beam must cause a change
between 1 and 0.
00.05 APSF f.
(rotary encoder frequency)
xxx Hz Shows current rotary encoder frequency when
labeller operating with automatic speed adjust-
ment.
 Increase/decrease belt speed
– Displayed frequency must increase/de-
crease accordingly
[Tab. 58] Overview for the “MACHINE SETUP > Sensor Test“