Operating Manual
LA-BO
Operation
ACTIVATING/DEACTIVATING THE APPLICATOR
In most cases, the applicator will be supplied with compressed air by the plant in which it is integrated.
To switch the compessed air supply on/off, use the appropriate valve at the plant.
Alternatively, the on-off valve at the service unit can be used to switch the compressed air on/off.
On:
► Push the slide (A) at the on-off valve into the
lower
position („Open“).
Off:
► Push the slide at the on-off valve into the
upper
position.
Fig. 19: Slide (A) at the on-off valve in „open“ position (B).
Edition 05 - 08/2022
31
Operation
Activating/deactivating the applicator
