Operating Manual
LA-BO
► Adjustment of the LA-BO application height is done by adjusting the mounting height of the ma-
chine.
Fig. 12: Labelling distance between LA-BO and product.
ADJUSTMENTS TO THE LABEL MATERIAL
The following adjustments have to be made every time the label format is changed on the machine.
Adjusting the sliding bars in the vacuum grid
Because the LA-BO needs to create a strong air flow, evenly spread over the label surface, it is
important to adjust the sliding bars of the vacuum grid. Once this setting is done, the sliding bars will
close off the air nozzles which are positioned outside the label area.
Procedure
1.
Adjust the bars of the vacuum grid enough outside so a label can be dispensed freely on the vacu-
um grid without touching any of the knobs (A) on the bars.
A
Fig. 13: The sliding bars in the vacuum grid must be adjusted to close off air nozzles outside the label surface.
Edition 05 - 08/2022
26
Startup
Adjustments to the label material
