Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5, Installation Manual, Page: 66 / 76

66 ZENworks Endpoint Security Management Installation Guide
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
9 Select how policies are to be received (managed through ESM servers for managed clients or
retrieved locally for an unmanaged (standalone) configuration. Click
Next .
For details about an unmanaged installation, see Chapter 10, “ZENworks Endpoint Security
Management Unmanaged Installation,” on page 71 .
10 (Optional) If you selected Manage through ESM servers in Step 9 , type the name of the server
supporting the Management service.
The server name you enter must match the “Issued To” name that is provided in the trusted root
certificate used on the server where you installed the ZENworks Endpoint Management
Service or Single Server. This will either be the NETBIOS name or the Fully Qualified Domain
Name (FQDN) of the server running the ZENworks Endpoint Management Service
component. Once entered, click
Next .
11
Click Install to begin the installation.
12 After the software is installed, restart the machine when you are prompted to do so.
For a list of features that are not available for the 4.0 Client for Vista, see
Section 9.4, “Features
Not Supported In the Endpoint Security Client 4.0,” on page 70 .
9.2 MSI Installation
This procedure creates an MSI package for the Endpoint Security Client 4.0. This package is used
by a system administrator to publish the installation to a group of users via an Active Directory
policy, or through other software distribution methods.
Š
Section 9.2.1, “Using the Master Installer,” on page 66
Š
Section 9.2.2, “Using the Setup.exe File,” on page 66
Š
Section 9.2.3, “Completing the Installation,” on page 67
Š
Section 9.2.4, “Command Line Variables,” on page 68
Š
Section 9.2.5, “Distributing a Policy with the MSI Package,” on page 69
9.2.1 Using the Master Installer
If you are installing from the CD or ISO master installer and if you’re not planning to run any
command line variables:
1 Insert the CD and wait for the master installer to launch.
2 Click Product Installation .
3
Click Security Client .
4 Click Create ZSC MSI Package .
5
Continue with Section 9.2.3, “Completing the Installation,” on page 67 .
9.2.2 Using the Setup.exe File
If you are using just the
setup.exe
file for installation:
1 Right-click
setup.exe
.
The executable can be found on the CD under
D:\ESM32\ZSC
.
2 Select Create Shortcut .