Novell ZENworks 10 Configuration Management Asset Inventory, Reference Manual, Page: 24 / 144

24 ZENworks 10 Configuration Management Asset Inventory Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
You can define the scan schedule settings at three levels:
Š
Management Zone: The settings are inherited by all device folders and devices. To schedule a
scan for the Management Zone, see Section 2.2.1, “Configuring an Inventory Scan Schedule
for the Management Zone,” on page 24 .
Š
Device Folder: The settings are inherited by all devices contained within the folder or its
subfolders. Overrides the Management Zone settings. To schedule a scan for devices in a
folder, see
Section 2.1.2, “Configuring a Scan for Devices in a Folder,” on page 17 .
Š
Device: The settings apply only to the device for which they are configured. Overrides the
settings at the Management Zone level and device folder level. To schedule a scan for a device,
see
Section 2.2.3, “Configuring an Inventory Scan Schedule for a Device,” on page 38 .
2.2.1 Configuring an Inventory Scan Schedule for the
Management Zone
1 In ZENworks Control Center, click Configuration , then in the Management Zone Settings
panel, click Inventory .
2 Click Inventory Schedule in the category list.
3 In the Schedule Type field, select what type of schedule you want to use.
No Schedule: No scan is scheduled. See “No Schedule” on page 24 .
Date Specific: Scans run on specified dates. See “Date Specific” on page 24 .
Recurring: Scans run on a recurring schedule. See “Recurring” on page 25 .
Event: Scans are triggered by an event. See “Event” on page 31 .
No Schedule
1
Select No Schedule in the Schedule Type field.
2 Click Apply or OK .
No automatic scans are configured.
Date Specific
1 Select Date Specific in the Schedule Type field.