Novell GROUPWISE 7 - CROSS-PLATFORM, Manual, Page: 88 / 130

88 GroupWise 7 Cross-Platform Client User Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
To learn about what the fields represent, see “Understanding Rule Fields” on page 90 .
3 Click the operator drop-down list, then click an operator.
To learn how to use operators, see
“Using Rule Operators” on page 89 .
4 Type the criteria for the filter.
or
If a drop-down list is provided, click the drop-down list, then click existing criteria.
5 Click the last drop-down list, then click End .
or
Click the last drop-down list, then click
And or Or to further limit the items affected by the rule.
6.6.10 Running a Rule Manually
1 Click the items or folders that you want affected by the rule.
2 Click Tools > Rules .
3 Click the rule you want to run.
4 Click Run , then click Close .
The rule actions occur after you close the Rules dialog box.
6.6.11 Enabling or Disabling a Rule
A rule must be enabled before it can be triggered. When you disable a rule, the rule cannot be
triggered. However, the rule is still listed in the Rules dialog box so you can enable it when you need
it again.
1 Click Tools > Rules .