Novatron XSITE PRO SPI 14.2, User Manual

Page: 58 / 79

5.4.2 Drilling plan creator
With creator you can define field by entering the number of rows
and columns.
How to create “Drilling plan”
1. Select “ Operations ” → “ Drilling plan creator ”
2. Enter:
a) Row count
b) Column count
c) Row spacing (in metres)
d) Column spacing (in metres)
3. Place bucket's measurement point to the starting point (1)
of the field and press Start Point
4. Place bucket's measurement point to the direction point (2)
of the field and press Direction Point
5. Press Generate to create field with rows and columns
a) Note: Generating field takes few seconds
Fig. 67 Completed “Drilling Plan”
User Manual. Xsite PRO SPI 14.2 Page 55 / 77
Fig. 66 Drilling plan creator