30
User Chord Mode
In User Chord Mode you can assign up to six-note chords to each pad. Your Launchkey saves these
chords to its internal memory and are accessible between power cycles. Any assignments you make
are still available even after you turn Launchkey off and on again.
To enter User Chord Mode hold the Shift button and press the User Chord pad (bottom row, fourth
from the left).
To assign a chord to a pad press and hold the pad and press the notes you want to assign from the
keyboard. You can assign up to six notes to each pad. You can input notes with individual key pushes,
meaning you do not need to hold down all the notes at once so long as the pad is being held.
When you assign a chord to a pad it lights up blue. When you press a pad it plays the chord and lights
up green. If no chord is assigned the pad will not be lit.
To delete a chord assignment from a pad hold the stop/solo/mute button, the pads with assigned
chords will turn red. Press a red pad to delete the assigned chord, once deleted the pad will no longer
be lit.
Summary of Contents for Launchkey 25
Page 1: ...1 Version 6 User Guide ...
