Ex-Power DEFENDER – Operation and Maintenance Manual
Novatio Engineering Confidential Document
3-10
6.
Turn OFF the generators.
7.
Disconnect the parallel operation cables after stopping the engines, unless parallel
operation is to resume.
If the generators are overloaded [overload indicator (red)] or if there is a short circuit in a
connected appliance, the overload indicator (red) will go ON. The overload indicator (red) will
stay ON, and after about four seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF. Stop both engines and investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an overload. Correct the
problem and restart the generator.
3.6
DC Operation (Using Optional Battery Charging Cable)
The Ex-Power DEFENDER has NOT BEEN APPROVED for charging external batteries from
the DC Output. Use of the DC Output for battery charging is not supported at this time. Please
contact Novatio for support if DC power is required.
Summary of Contents for Ex-Power DEFENDER
Page 44: ...NOTES...
