APPENDIX E LN-200 IMU in SPAN IMU Enclosure
OEM7 SPAN Installation and Operation User Manual v14
306
Figure 139: Lift Top Cover and Tube Body
E.2 Install the LN-200 Sensor Unit
To install the LN-200 sensor, follow these steps:
1. Mount the LN-200 sensor with the attached M4 screws. Apply threadlock to the screw threads. Use a hex
key to torque each screw to 10 in-lbs.
2. Fit the tube body over the LN-200 sensor and onto the base plate.