Novatel MiFi 4620L User Manual Download Page 10

Page: 10 / 79

Service Status Indicator (LED) States

LED Color

Status

Description

No Light

The device is powered of or otherwise is not getting power.

Amber

Solid

Blinking

The device is in power down mode.

The device is powered of and also charging the battery.

Green

Solid

Blinking

The device is powered on; 4G LTE service is available but not
connected or connected while dormant.

The device is powered on and connected to the 4G LTE network
and transmitting data.

Violet

Solid

Blinking

The device is powered on; 3G 1X or EV-DO service is available but
not connected or connected while dormant.

The device is powered on and connected to a 3G 1X or EV-DO
network and transmitting data.

Red

Blinking

If this occurs during power up, no SIM card is inserted. All other
times, this indicates an error or a SIM card failure.

White

Blinking

The device is powered on and the irmware is being upgraded.
This LED only applies to over-the-air irmware updates.

Summary of Contents for MiFi 4620L
















































































Search results

Summary of Contents for MiFi 4620L

Reviews:

Related manuals for MiFi 4620L

Brands by name

Popular brands

Novatel MiFi 4620L, User Manual

Search results

Summary of Contents for MiFi 4620L

Reviews:

Related manuals for MiFi 4620L

Brands by name

Popular brands