20
Mac Setup and Connection
This section contains information on installing the software, configuring your new profile, and
connecting to the network . Most of the information is the same between OS X v10 .4+ and OS X
v10 .5+ . Differences are noted where they occur .
Install the Software
➊
Turn on your computer and close all open applications .
You will need to restart your Mac to complete the
installation.
NOTE:
➋
Use the microUSB cable to attach MiFi to a USB port on your Mac . MiFi will turn on
automatically .
Only the LED on the power button will light.
WiFi is disabled in USB Modem mode.
NOTE:
➌
A welcome window will open showing the installer package .
➍
Open
Installer.pkg
to load the drivers and MobiLink 3 software onto your Mac .
➎
Follow the onscreen instructions and restart the Mac when requested .