NovaStar VNNOX, Quick Start Manual, Page: 12 / 33

VNNOX Cloud-Based Publishing Service
Quick Start Guide 4 Publishing Solutions with VNNOX Lite
Figure 4-1 The Config tab
Step 2 Click the drop-down arrow on the right of Server Address in the Config tab and
select New .
Step 3 Enter the server name and address in the New dialog box and then click OK . The
Server Address must be the same as the server address in VNNOX.
Step 4 Enter certified user name and password which must be the same as the user name
and password in VNNOX.
Step 5 Click Get and then click OK to close the prompt box. Bind and create player will be
displayed in the drop-down options.
Step 6 Click OK .
is shown in the bottom left corner of the page.
4.2.2 Creating Players with ViPlex
4.2.2.1
ViPlex Handy (Android and iOS)
Before You Begin

Get the SSID and password of WiFi AP of the Taurus. The default SSID is
“
AP +the last 8 digits ”. The default password is “ 12345678 ”.

Get the password of the user “ admin ”. The default password of the user “ admin ”
is “ 123456 ”.

Connect the Taurus to Internet.
Operating Steps
The ViPlex Handy can connect any number of the Taurus products.
Step 1 Connect to the WiFi AP of the Taurus products.
Step 2 Start ViPlex Handy.
www.novastar.tech 8
XI'AN
NOVASTAR
TECH
CO.,LTD.