NovaPro UHD Jr All-in-One Controller
User Manual
2 Appearance
www.novastar.tech
3
signal is accessed.
TFT screen
Display the current device status and settings menu.
Knob
On the home screen, press the knob to enter the operation
menu screen.
On the operation menu screen, rotate the knob to select a
menu item, and press the knob to confirm the selection or
enter the submenu.
When a menu item with parameters is selected, you can
rotate the knob to adjust the parameters. Please note that
after adjustment, you need to press the knob again to
confirm the adjustment.
ESC button
Press the button to exit the current menu or cancel the
operation.
Function buttons
PIP
: Enable/Disable PIP.
SCALE
: Enable/Disable full screen function for main layer.
DVI MOSAIC
: Switch to DVI mosaic input source. Press it to
switch the input source of main layer, while hold it down to
switch the input source of PIP. Main layer and PIP can be set
according to your preference.
FN
: This is a custom function button. The function can be
customized to Synchronization, Freeze, Black Out, Test
Pattern, Quick Configuration, Image Quality and Preset
Settings. It is Synchronization by default.
2.2 Rear Panel
Input
Connector
Quantity
Description
DVI
4
Four DVIs are all single-link DVI connectors by
default.
−
4 × DVI inputs
−
Each DVI: Input resolution up to
1920×1200@60Hz, downward compatible
−
4 DVI input sources constitute 1 input
source (DVI MOSAIC).
XI'AN
NOVASTAR
TECH
CO.,
LTD.
