NovaPro UHD Jr All-in-One Controller
User Manual
5 Menu Operations
www.novastar.tech
10
5.2 Screen Settings
You can configure the screen to make it display the whole image correctly.
The options are
Quick Configuration
and
Advance Configuration
.
5.2.1 Quick Configuration
Preconditions
LED screen must be a regular screen.
Cabinets of the screen must be regular cabinets with the same resolution.
The following data flow settings are supported. During data flow settings, you
must ensure that the physical connection of each port is along the same
direction and downward to next one.
During data flow settings, you must ensure that the Ethernet Port 1 is at the
beginning position of the whole physical connection.
Procedure
Step 1 Power on the LED screen.
Step 2 Rotate the knob to choose
Screen Settings
>
Quick Configuration
, and press it to
enter its submenu.
Figure 5-2 Quick configuration
Step 3 Set
Cabinet Row Qty
and
Cabinet Column Qty
according to the actual row and
column quantities of the cabinets.
Step 4 Rotate the knob to
Port 1 Cabinet Qty
to set the quantity of the cabinets loaded by
Ethernet port 1.
Step 5 Rotate the knob to
Data Flow (Front View)
and press it, then select an appropriate
physical connection mode of the cabinets.
During data flow settings, you can view the real-time effects of different data flow
settings on LED display by rotating the knob. When you are satisfied with the LED
XI'AN
NOVASTAR
TECH
CO.,
LTD.
