MCTRL660 PRO Independent Controller User Manual
www.novastar.tech
16
Figure 6-10 Auto configuration
Step 1 On the home screen, press the knob to enter the main menu.
Step 2 Choose
Screen Settings
>
Auto Config
to enter its submenu.
Step 3 Enable
Auto Config
and select a data flow.
6.3.4 Image Offset
After configuring the screen, adjust the horizontal and vertical offsets (
Start X
and
Start Y
) of the overall display
image to ensure it is displayed in the desired position.
Figure 6-11 Image offset
Step 1 On the home screen, press the knob to enter the main menu.
Step 2 Choose
Screen Settings
>
Image Offset
to enter its submenu.
Step 3 Set the
Start X
and
Start Y
values.
Display Control
Control the display status on the LED screen.
Figure 6-12 Display control
Normal: Display the content of the current input source normally.
Black Out: Make the LED screen go black and do not display the input source. The input source is still being
played in the background.
Freeze: Make the LED screen always display the frame when frozen. The input source is still being played in
the background.
Test Pattern: Test patterns are used to check the display effect and pixel operating status. There are 8 test
patterns, including pure colors and line patterns.
Image Mirroring
Mirror images displayed on the LED screen. You can disable mirroring, mirror the image from left to right or
from top to bottom. The image mirroring is based on the entire output image.
Constraints:
XI'AN
NOVASTAR
TECH
CO.,
LTD.
