KU20 LED Display Controller User Manual
www.novastar.tech
14
Figure 6-12 Save to RV card
Select
Yes
in the displayed dialog box.
After the values are successfully saved, a message appears on the menu screen.
6.3.3
Set Low Latency
Turn on the low latency function to reduce the delay at the sending card, or increase the delay when the device is
used with high-latency equipment.
On the main menu screen, choose
Advanced Functions
>
Output Settings
.
Figure 6-13 Low latency
Perform any of the following operations as required.
Enable low latency
Set the
Low Latency
switch to
to enable the low latency function.
Set additional frame delay
a.
Select
Additional Video Delay
and then the value becomes editable.
b.
Rotate the knob to adjust the parameter to the target value, and then press the knob to confirm.
6.3.4
Set Bit Depth
Set the output bit depth of the input source.
On the main menu screen, choose
Advanced Functions
>
Output Settings
.
Figure 6-14 Bit depth
Select
Bit Depth
and then select the desired bit depth value from the drop-down options.
If
Auto
is selected, the output bit depth is the same as the input bit depth.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
