KU20 LED Display Controller User Manual
www.novastar.tech
11
Figure 6-4 EDID parameters
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, select
Apply
and press the knob.
6.1.3
Adjust Color
Set the input source override parameters and adjust the color. The override parameters will be used in the calculation
of color adjustment. If the values of these parameters are not set manually, the values that come with the input
source can be used.
On the main menu screen, choose
Input Settings
>
HDMI
>
Infoframe Override
.
Figure 6-5 Infoframe override
Set the following override parameters as required.
Figure 6-6 Override parameters
Select
From Input
and the device will read the attribute value that comes with the input source.
Press the
BACK
button to go back to the upper-level menu.
Select
Color Adjustment
.
Set the related parameters.
Black level is used to adjust the contrast of the dark areas of the image.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
