5
IMS-MN-LMDE42C_A
SAFETY INFORMATION
Important Information
Notice
Read these instructions carefully, and look at the equipment to become familiar with the device before
trying to install, operate, service, or maintain it. The following special messages may appear throughout
this documentation or on the equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of this symbol to a “Danger” or “Warning” safety label or message
indicates that an electrical hazard exists which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert of potential personal injury hazards.
Obey all safety messages and labels that follow this symbol to avoid possible injury or
death.
DANGER
DANGER
indicates a hazardous situation which, if not avoided,
will result
in death or serious injury.
WARNING
WARNING
indicates a hazardous situation which, if not avoided,
could result
in death or serious injury.
CAUTION
CAUTION
indicates a hazardous situation which, if not avoided,
could result
in minor or moderate injury.
NOTICE
NOTICE
is used to address practices not related to physical injury.
Qualification of Personnel
Electrical equipment should be installed, operated, serviced, and maintained only by qualified
personnel. No responsibility is assumed by Novanta IMS for any consequences arising out of the
use of this material.
A qualified person is one who has skills and knowledge related to the construction and
operation of electro-mechanical equipment and its installation, and has received safety training
to recognize and avoid the hazards involved.
CyberSecurity Standards and Certification
Novanta follows local regulations and uses additional industry established frameworks to
conform to cyber security standards. Novanta also takes an active part in the evolution of
today’s industrial cyber security standards, contributing to these standards and frameworks.
In accordance with US California Senate Bill No. 327, and under direct guidance from Novanta,
Novanta IMS has implemented a level of cyber-secure protection in the LMD Ethernet-based
MDrive product line in order to protect these devices from outside cyber attacks. By choosing
to disable these features, the customer is acknowledging their acceptance of potential
unauthorized outside access.
