Novanta f201, User Manual, Page: 16 / 105

NOMENCLATURE (CONTINUED) PAGE | 16
Nomenclature (Continued)
Table 2-1 f201 ship kit contents.
Shipping Box Contents Qty
DC Power Cable 1
Quick Start plug 1
BNC Control Cable (f201 only) 1
Cooling tubing 1
Mounting bolts 3/6
NOVANTA CO
2
Welcome Flier 1
Spare 20 Ampere Fuses (not shown) 1/2
Chiller Fittings 2
Spherical Washer Sets (f201 only) 3
Cooling Kit 1
Final Test Report (not shown) 1
f201 contents description
Each item listed in the table above is described below:
DC Power Cable – carries DC power from the DC power supply to your F201 laser laser.
Quick Start Plug – connects to F201 laser’s User I/O connector. Jumpers are built into the plug to enable
F201 laser’s shutter and remote interlock circuits for initial start-up and testing.
BNC Control Cable (f201 only) – Coaxial cable carries the PWM Command signal from the UC-2000
Controller to the laser’s Quick Start Plug.
Cooling Tubing – Carries cooling water from the chiller to the laser and back. This black polyethylene
tubing is 1/2-inch O.D. by 30 feet and must be cut to length.
Mounting Bolts –Fasten our laser to your mounting surface. F201 laser f201 lasers include three metric (M8
×
1.25
×
30 mm) and three standard (5/16–18
×
1.25" UNC) cap screws.
NOVANTA CO
2
Welcome Flier – Contains an f201 customer welcome that provides where to find, opera-
tion, and maintenance information for your f201 single-tube laser on our website.
Spare 20 Ampere Fuses (not shown) – fast-blow fuses protect F201 laser’s internal circuitry.
Chiller Fittings – Adapt 1/2-inch O.D. tubing to 3/8" NPT threads for connection to a chiller. The chiller’s
inlet and outlet ports must be equipped with, or be adapted to, 3/8" NPT female threads.
Spherical Washer Sets (not shown) – used in conjunction with F201 laser f201 mounting bolts to align the
laser to your mounting surface. Shipped with f201 lasers only.
Cooling Kit – adapts the laser’s straight 1/2-inch coolant fittings to 90° adaptor fittings for either 1/2-inch
standard or 12-mm metric cooling tubing.
Final Test Report (not shown) – contains data collected during the laser’s final pre-shipment test.