Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
C-48
7. Java
®
Demo Application
The user can collect and view F/T data through the Java
®
demo application on a personal computer. Install Java
®
version 6.0 (runtime 1.6.0) or later on the computer (download Java
®
from
7.1
Starting the Demo
Download the demo from the
Demo
page on the ATI Ethernet Axia F/T webpage:
1. Click the
Download Demo Application
button and follow the browser’s instructions.
•
The file ATINetFT.jar downloads. If the browser does not automatically run the downloaded file,
manually open the file on the computer.
Figure 7.1—Demo Page
NOTICE:
The Java
®
Demo requires the Ethernet F/T to have its RDT Interface enabled. RDT is
enabled in the Ethernet F/T by default. For information on RDT settings, refer to
.
•
The demo program opens with the following window:
Figure 7.2
—Ethernet IP Address Request
•
If the window does not appear, it may be hidden under the browser window. In this case, minimize the
browser window.
2. Type the IP address of the sensor.
•
On the
Demo
page, the IP address of the sensor is in the paragraph above the
Download Demo
Application
button.
3.
Click
OK
.
•
The Java
®
Demo application main window opens.
