NOVA3D ELFIN, User Manual, Page: 7 / 57

6
When stacking several devices on a pallet, follow the instructions provided on the
packaging. Once device may weigh more than 10 kg [22 lb]. It is therefore advisable to provide
safe pallet storage but not higher than 1.7 m [5’7’’]. It should be noted that the packages must
not project beyond the outline of the pallet. Packages stacked on the pallet should be then
bound together and wrapped in foil. The pallet prepared as above can be then forwarded to the
shipping company.
Pallet stacking and destacking should be carried out by two people. The package with the
device should be lifted or moved using special handles.
Electromagnetic Compatibility (EMC)
Nova3D printer complies with Part 15 of the FCC rules. Its operation is subject to the
following two conditions: this device may not cause harmful interference, and this device must
accept any interference received, including interference that may cause undesired operation.
The printer generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the following User Manual, may cause harmful interference to radio
communications.
1. Learn More About the Nova3D ELFIN
Nova3D ELFIN is a 3D printer which, together with NovaMaker and dedicated materials,
constitutes the whole 3D printing ecosystem. This device makes it possible to turn digital,
three-dimensional projects into reality using the UV LCD technology which relies on curing
liquid photopolymer layer after layer. The UV LCD technology involves projecting an image of
a layer on the transparent underside of the vat with liquid resin and curing the layer using
backlight from a UV lamp. After each layer is cured, the lamp pauses to operate. During the
pause, the layer solidifies and the platform rises and lowers itself so the resin is equally
distributed in the vat. The printer is equipped with an LCD screen which is responsible for
projecting successive layers and masking the UV light. Thanks to that, the resin that is outside