997-417, Issue 2 June 2002
E
E
F
F
D
D G
G
G
G
G
G
G
G
C
C
G
G
B
B
F
F
D
D
E
E
A
A
Check Your Equipment....
Check Your Equipment....
The NOTIFIER IDR-MD Mimic Driver kit (PN: 020-574) is provided as part of a versatile system to provide effective mimic display
solutions. The installer is responsible for the correct assembly and electrical interconnection of the various components of the IDR Mimic
system. The kit is simple to install providing the instructions described below are followed.
The kit comprises one mimic driver PCB and two mimic driver termination PCBs mounted on separate chassis. One ribbon cable is
provided for interconnection between the mimic driver PCB and the mimic control PCB (provided in kit PN: 020-573) or the previous mimic
driver PCB. Up to eight driver PCBs can be driven by one mimic control PCB. Two ribbon cables are provided for interconnection between
the mimic driver PCB and the two driver termination PCBs. Each driver termination PCB can support the connection of up to 32 LEDs or
relays (selected by jumper links) and also has 8 I/O lines. The IDR-MD mimic driver kit is designed for installation either using a third-party-
provided chassis/enclosure or the NOTIFIER ID/NFXXXX Adapter Mimic Kit (PN: 020-597) for 19” rack mounting applications. The
installation must meet the Environmental specifications defined in the IDR-M Mimic Control Board manual (ref. 997-412).
The NOTIFIER IDR-MD Mimic Driver kit (PN: 020-574) is provided as part of a versatile system to provide effective mimic display
solutions. The installer is responsible for the correct assembly and electrical interconnection of the various components of the IDR Mimic
system. The kit is simple to install providing the instructions described below are followed.
The kit comprises one mimic driver PCB and two mimic driver termination PCBs mounted on separate chassis. One ribbon cable is
provided for interconnection between the mimic driver PCB and the mimic control PCB (provided in kit PN: 020-573) or the previous mimic
driver PCB. Up to eight driver PCBs can be driven by one mimic control PCB. Two ribbon cables are provided for interconnection between
the mimic driver PCB and the two driver termination PCBs. Each driver termination PCB can support the connection of up to 32 LEDs or
relays (selected by jumper links) and also has 8 I/O lines. The IDR-MD mimic driver kit is designed for installation either using a third-party-
provided chassis/enclosure or the NOTIFIER ID/NFXXXX Adapter Mimic Kit (PN: 020-597) for 19” rack mounting applications. The
installation must meet the Environmental specifications defined in the IDR-M Mimic Control Board manual (ref. 997-412).
Taking suitable precautions, before proceeding with the installation, remove all
packaging and inspect for any damage that may have occurred during transit. If
no damage is evident, proceed using the instructions below. In the unlikely
event that damage has occurred, or any items are missing, DO NOT
PROCEED, contact your supplier and refer to the panel Installation &
Commissioning Manual.
Observing all necessary precautions, proceed with the installation of the IDR-
MD Mimic Driver Kit.
Taking suitable precautions, before proceeding with the installation, remove all
packaging and inspect for any damage that may have occurred during transit. If
no damage is evident, proceed using the instructions below. In the unlikely
event that damage has occurred, or any items are missing, DO NOT
PROCEED, contact your supplier and refer to the panel Installation &
Commissioning Manual.
Observing all necessary precautions, proceed with the installation of the IDR-
MD Mimic Driver Kit.
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
ATTENTION
ATTENTION
997-417, Issue 2 June 2002
E
E
F
F
D
D G
G
G
G
G
G
G
G
C
C
G
G
B
B
F
F
D
D
E
E
A
A
Check Your Equipment....
Check Your Equipment....
The NOTIFIER IDR-MD Mimic Driver kit (PN: 020-574) is provided as part of a versatile system to provide effective mimic display
solutions. The installer is responsible for the correct assembly and electrical interconnection of the various components of the IDR Mimic
system. The kit is simple to install providing the instructions described below are followed.
The kit comprises one mimic driver PCB and two mimic driver termination PCBs mounted on separate chassis. One ribbon cable is
provided for interconnection between the mimic driver PCB and the mimic control PCB (provided in kit PN: 020-573) or the previous mimic
driver PCB. Up to eight driver PCBs can be driven by one mimic control PCB. Two ribbon cables are provided for interconnection between
the mimic driver PCB and the two driver termination PCBs. Each driver termination PCB can support the connection of up to 32 LEDs or
relays (selected by jumper links) and also has 8 I/O lines. The IDR-MD mimic driver kit is designed for installation either using a third-party-
provided chassis/enclosure or the NOTIFIER ID/NFXXXX Adapter Mimic Kit (PN: 020-597) for 19” rack mounting applications. The
installation must meet the Environmental specifications defined in the IDR-M Mimic Control Board manual (ref. 997-412).
The NOTIFIER IDR-MD Mimic Driver kit (PN: 020-574) is provided as part of a versatile system to provide effective mimic display
solutions. The installer is responsible for the correct assembly and electrical interconnection of the various components of the IDR Mimic
system. The kit is simple to install providing the instructions described below are followed.
The kit comprises one mimic driver PCB and two mimic driver termination PCBs mounted on separate chassis. One ribbon cable is
provided for interconnection between the mimic driver PCB and the mimic control PCB (provided in kit PN: 020-573) or the previous mimic
driver PCB. Up to eight driver PCBs can be driven by one mimic control PCB. Two ribbon cables are provided for interconnection between
the mimic driver PCB and the two driver termination PCBs. Each driver termination PCB can support the connection of up to 32 LEDs or
relays (selected by jumper links) and also has 8 I/O lines. The IDR-MD mimic driver kit is designed for installation either using a third-party-
provided chassis/enclosure or the NOTIFIER ID/NFXXXX Adapter Mimic Kit (PN: 020-597) for 19” rack mounting applications. The
installation must meet the Environmental specifications defined in the IDR-M Mimic Control Board manual (ref. 997-412).
Taking suitable precautions, before proceeding with the installation, remove all
packaging and inspect for any damage that may have occurred during transit. If
no damage is evident, proceed using the instructions below. In the unlikely
event that damage has occurred, or any items are missing, DO NOT
PROCEED, contact your supplier and refer to the panel Installation &
Commissioning Manual.
Observing all necessary precautions, proceed with the installation of the IDR-
MD Mimic Driver Kit.
Taking suitable precautions, before proceeding with the installation, remove all
packaging and inspect for any damage that may have occurred during transit. If
no damage is evident, proceed using the instructions below. In the unlikely
event that damage has occurred, or any items are missing, DO NOT
PROCEED, contact your supplier and refer to the panel Installation &
Commissioning Manual.
Observing all necessary precautions, proceed with the installation of the IDR-
MD Mimic Driver Kit.
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
ATTENTION
ATTENTION
Your kit PN: 020-574 should contain:
Mimic Driver Assembly
PN: 004-096
Mimic Driver Termination Assemblies (2 off) PN: 004-097
Ribbon Cable, 10-way
PN: 082-171-004
Ribbon cable, 40-way (2 off)
PN: 082-220
Plug, 8-way screw terminating (2 off)
PN: 610-169
M4 x Nyloc locking nuts (2 off)
PN: 750-058
Fuse, 500mA (T)
PN: 570-105
8-way Jumper Block (8 off)
PN: 542-340
Anti-Static Warning instructions
PN: 997-180
Your kit PN: 020-574 should contain:
Mimic Driver Assembly
PN: 004-096
Mimic Driver Termination Assemblies (2 off) PN: 004-097
Ribbon Cable, 10-way
PN: 082-171-004
Ribbon cable, 40-way (2 off)
PN: 082-220
Plug, 8-way screw terminating (2 off)
PN: 610-169
M4 x Nyloc locking nuts (2 off)
PN: 750-058
Fuse, 500mA (T)
PN: 570-105
8-way Jumper Block (8 off)
PN: 542-340
Anti-Static Warning instructions
PN: 997-180
The mimic driver assemblies are designed to interlock using the provided
studs and corresponding holes of each metal chassis and the supplied M4
Nyloc locking nuts.
Procedure
Position the mimic driver assemblies (A) as shown below so that each
joggled (cranked) long-sided edge (B) is adjacent to the non-joggled long-
sided edge (C) of the next assembly. Pass the two studs (D) through the
holes (E) of the next assembly. Secure together using the supplied M4
Nyloc nuts (F). DO NOT over-tighten!
Repeat procedure as required. When all assemblies are connected
together, secure the assembly within its enclosure using the provided
4mm holes (G).
The mimic driver assemblies are designed to interlock using the provided
studs and corresponding holes of each metal chassis and the supplied M4
Nyloc locking nuts.
Position the mimic driver assemblies (A) as shown below so that each
joggled (cranked) long-sided edge (B) is adjacent to the non-joggled long-
sided edge (C) of the next assembly. Pass the two studs (D) through the
holes (E) of the next assembly. Secure together using the supplied M4
Nyloc nuts (F). DO NOT over-tighten!
Repeat procedure as required. When all assemblies are connected
together, secure the assembly within its enclosure using the provided
4mm holes (G).
Procedure
Fixing Multiple Mimic Driver Assemblies Together
to Form an Interlocking Module
Fixing Multiple Mimic Driver Assemblies Together
to Form an Interlocking Module
For clarity, only the middle Mimic Display board is shown in detail.
For clarity, only the middle Mimic Display board is shown in detail.
!!
CAUTION!
To ensure EMC requirements are
met, ALWAYS install the IDR-MD
Mimic Driver Kit PCBs in an
enclosure. NEVER REMOVE the
PCBs from their metal chassis
plates, which MUST be earthed.
Route external wiring away from
SPI bus cables.
CAUTION!
To ensure EMC requirements are
met, ALWAYS install the IDR-MD
Mimic Driver Kit PCBs in an
enclosure. NEVER REMOVE the
PCBs from their metal chassis
plates, which MUST be earthed.
Route external wiring away from
SPI bus cables.
1
Installing the IDR-MD Mimic Driver Kit
Installing the IDR-MD Mimic Driver Kit
