Page 9 of 14
⚠
CAUTION
To prevent property damage, watch for and avoid catching the rake on stumps, large rocks, large dirt
piles, and other immovable objects.
⚠
WARNING
DO NOT TAKE A DITCH AT 90° (straight on)! Always approach from an angle or damage may occur.
⚠
CAUTION
Before dismounting power unit or performing any adjustments to the box scraper, make sure to
disengage power to equipment, lower 3-point hitch and all raised components to the ground, operate
valve levers to release any hydraulic pressure, set parking break, stop engine, remove key and allow
implement to come to a complete stop before dismounting tractor. Never leave equipment unattended
with tractor running.
It is essential that everyone involved in the operation, transportation, maintenance, and
storage of this equipment is aware, concerned, prudent, and properly trained in safety.
⚠
DANGER
The shanks are extremely sharp. Exercise extreme caution when working around or near
the Box Scraper shanks. Failure to stay clear of the blade edges can result in serious injury.
⚠
CAUTION
Stop IMMEDIATELY upon striking an obstruction. Turn off the engine, remove the key, inspect, and
repair any damage before resuming operation. Never leave the seat of the tractor while the engine is
engaged.
⚠
CAUTION
Watch for hidden obstructions, like buried pipes, rocks, concrete piers, or uneven slabs of concrete
when operating the Box Scraper, as damage to the unit can occur. This is especially true with snow
removal.
Maintenance
Maintenance Safety
1. Keep all persons away from operator control area while performing adjustments, service, or
maintenance.
2. Periodically tighten all bolts, nuts and screws and check that all cotter pins are properly
installed to ensure unit is in a safe condition.
