Page 8 of 14
Before Each Use
Tractor Requirements and Preparation
The Landscape Rake fits category 1 hitches.
Check the tractor’s 3-point hydraulic lift system. It should operate up and down smoothly and have
enough power to lift the rake. Refer to your tractor’s Owner’s Manual or dealer for any adjustments
necessary to put the 3-point hydraulic lift system in good working order.
Check the tires and rims to make sure they are in good condition. Inflate the tires to the proper
recommended air pressure. Smaller tractors may need front counter weights to counter-balance the
weight of the implement. Mounted rakes normally require added weight to the tractor to maintain the
proper stability and traction during operation and transport.
Mounting Instructions
Make sure the lower draw pins (pull pins) are installed correctly for your tractor.
Insert the draw pins into the ball sockets in the lower lift arms of the tractor
’s 3-point hitch. Lock into
place with linch pins. Attach the mast of the 3-point main frame by installing the tractor
’s top link with
the top link pin.
Adjust the top link assembly to obtain the correct angle of the implement. Check the tractor 3-point lift
arms and adjust to level the implement from side to side.
Never allow anyone to ride or sit on the rake or tractor while in operation. Keep bystanders at a safe
distance.
Preparation Procedure
Thoroughly read and understand this Owner's Manual.
UNDERGROUND UTILITIES
— Contact appropriate agencies to determine if hazardous items
are buried under the work area BEFORE OPERATING! Be certain underground utilities have
been called to locate underground electric, gas, telephone and other lines. Be sure the operator
is properly informed. WHEN IN DOUBT, DO NOT RAKE!