7/32"
#7
1/4-20
Spring Power Adjustment Screw
1601(BF) Series Only
"BC" Valve
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
4
Drill 9/32 thru from Closer Side
3/8 Drill other side
Drill 9/32 thru from Closer Side
3/8 Drill other Side
See Page 5
1618A Soffit Plate
Used with Parallel
Arm Closers Only
CA
UTION
CA
UTION
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
80-9316-2502-020 (12-02)
Non Handed Door Closer
Tri-Style
1600 Series
Regular Arm/Top
Jamb Shoe
Main Arm
Connecting Rod
Forearm
Screw
Arm Slide
1688
Plate
"DA" suffix (Delayed Action) is an optional
feature. A separate sheet is supplied
showing closer adjustments.
For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
These door closers should NOT be installed on the exposed side (weather side) of exterior doors.
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
See Page 5
See Page 2
See Pages
3 & 4
See Pages
3 & 4
Weaker
-
Stronger
+
#7 Drill, 1/4-20 Tap
For Wood drill 3/16 hole
