KMT161008 Quick Camp
ASSEMBLY INSTRUCTIONS
Verify package contents
Step 3: Secure main frame
1) At opposite corners with a person holding each end of a main pole, flex the pole into an
arch. Carefully place the ends into the fast feet located at the stake loops.
2) Repeat this step for the other main pole.
3) Clip the plastic hooks on the tent to the frame.
Step 2: Spread tent assemble main frame
1) Spread out the tent flat, floor side down.
2)
Assemble the tent poles by placing fiberglass sections into the metal ferrules.
3)
Place all four poles into the center connector.
Step 1: Assemble poles
(B) 1 each Fly
Tent : 1 each
Rainfly : 1 each
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free
of debris and sharp objects, away from a
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discoloration
may occur if applied to outside seams.
A
A
A
A
Tent Stakes : 14 each
Tablet Pocket : 1 each
1 Each Fly Pole :
Main Frame with Connector
(pre-attached to the tent) 1 each
1) Main frame pre-attached to the tent.
2) Assemble by placing fiberglass sections
into metal ferrules.
KMT161008 11/15
