Assembly
20
8.) Attach Lift Table to Log Splitter (this step requires two or more people)
a.) Bolt left mount arm to log cradle. Use four 3/8 x 1-
1/4” bolts and lock nuts. Do not tighten
completely.
b.) Bolt right mount arm to log cradle. Use four 3/8 x 1-
1/4” bolts and lock nuts. Do not tighten
completely.
c.) Attach lift table to mount arms. Use two log lift pins (one at each end). Be careful not to push
the lift pins too far into the lift table. Lock a pair of locking pliers onto the end of each lift pin to
make sure they don’t go in too far and also to help line up the holes for step e below.
d.)
Bolt lift pins to mount arms. Use two ¼ x 2” bolts and lock nuts. Tighten with wrench.
e.) Tighten bolts from step a and b above with a wrench.
