NORTHROP GRUMMAN Park Air T6-AV100, User Documentation

Page: 15 / 55

T6-D-USER-AV100-EN Page 1-1 Overview
© Park Air Systems Limited 2020
1 Overview
1.1 Introduction
The Park Air T6-AV100 VHF 100 W Power Amplifier enhances the capabilities of Park Air T6-TV VHF 50 W
T ransmitters and Park Air T6-TRV V H F 50 W T ransceivers
1
for the most challenging of RF environments.
The T 6 Amplifier is placed in series with a standard T6 Transmitter or Transceiver and provides amplification of
the R F output up to 100 W. The amplifier provides class-leading RF performance whilst integrated into a
small ligh t package.
The T6 VHF 100 W Power Amplifier features:

Class-leading RF co-location performance

Intelligent built-in-test to monitor its own performance and allow RF pass through to safeguard
communications

Extended service interval and service lifetime

Tool-free installation into the Park Air C4 Cabinet

No materials specified in the Restriction of Hazardous Substances Directive
The T6 VHF 100 W Power Amplifier accessories:

Mounting adaptor for 19” cabinets.
Associated accessories are shown in 8.1 Table of associated equipment
1.1.1 Standalone operation
The T6 VHF Amplifier can compliment standalone T6 Transmitters or Transceivers with the addition of a suitable
AC and/or DC supply, an antenna and a Park Air S2 Hand Microphone or Park Air S2 Headset .
Installation details are shown in 3.1 Standalone installation .
1. The T6 50 W Transmitters/Transceivers must be operating a firmware version of 65-00000841/10.8.0
or later.