PRO 1.5+
PRO 3+
NORTHROCK INDUSTRIES
TEL:
1-800-989-8423
3688 HORSEBLOCK ROAD
1-631-924-6130
MEDFORD, NY 11763
FAX:
1-800-315-1277
1-631-924-6369
PRO 2+
CONCRETE VIBRATORS
INSTRUCTION MANUAL
SAFETY, ASSEMBLY, AND MAINTENANCE INSTRUCTIONS FOR MODELS:
Page 1: ...ROCK INDUSTRIES TEL 1 800 989 8423 3688 HORSEBLOCK ROAD 1 631 924 6130 MEDFORD NY 11763 FAX 1 800 315 1277 1 631 924 6369 PRO 2 CONCRETE VIBRATORS INSTRUCTION MANUAL SAFETY ASSEMBLY AND MAINTENANCE INSTRUCTIONS FOR MODELS ...
Page 2: ...y the cord or yank it to disconnect it from the receptacle Keep the cord EXTENSION CORDS from heat oil and sharp edges Don t overreach keep proper footing and balance at all times Use only three conductor cords that have three prong Maintain tools by following instructions on cleaning grounding type plugs and three pole receptacles that and lubricating Inspect tool cords regularly if damaged accep...
Page 3: ... now ready for operation but with a new flexible shaft it will take a few minutes for the grease to run itself in For this short period it is normal for the flexible shaft to rattle and the motor speed to be somewhat slower 3 5 minutes Maintenance Instructions Motor keep housing and air filter clean to allow for proper cooling check brushes switch boot and electric cord for wear and replace when w...
