Northern TVIDVR16 User Manual Download

Page: 70 / 176

User Manual of Digital Video Recorder

5.6

Configuring Redundant Recording

Purpose:

Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the

redundant HDD, will effectively enhance the data safety and reliability.

Before you start:

You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to

Redundant. For detailed information, please refer to

Chapter 10.4 Managing HDD Group.

There should be at

least another HDD which is in Read/Write status.

Steps:

Enter HDD Information interface.

Menu> HDD

Figure 5. 23

HDD General

Select the

HDD

and click

to enter the Local HDD Settings interface.

Set the HDD property to Redundant.

Figure 5. 24

HDD General-Editing

Click

Apply

to save the settings.

Click

to back to the upper level menu.

Enter the Record setting interface.

Menu> Record> Parameters

Select the

Record

tab.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands