Northern TVIDVR16 User Manual Download

Page: 115 / 176

User Manual of Digital Video Recorder

114

8.8

Triggering or Clearing Alarm Output

Manually

Purpose:

Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dropdown list of dwell

time of an alarm output, the alarm can be cleared only by clicking

Clear

button in the following interface.

Steps:

Select the alarm output you want to trigger or clear and make related operations.

Menu> Manual> Alarm

Click

Trigger/Clear

button if you want to trigger or clear an alarm output.

Click

Trigger All

button if you want to trigger all alarm outputs.

Click

Clear All

button if you want to clear all alarm output.

Figure 8. 19

Clear or Trigger Alarm Output Manually

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands