Northern N3NVR Series User Manual Download

Page: 85 / 218

Network Video Recorder

UI System Setting

User Manual

Issue: V4.6.X(2022-04-24)

Figure 7-15

Disk screen

Step 2

Click

Format

. The message “Are you sure to format disk? Your data will be lost” is

displaying.

Step 3

Choose the disk group, there are four groups.

Step 4

Click

, and the disk would be formatted.

Step 5

Enable recording overwrite, the disk will be overwrote automatically.

Step 6

Record expiration setting. Select record expiration days from the drop-down list of record

expiration. The expired time is not 0, the records will be deleted when the time is over

the setting value.

Step 7

Click

to save the settings.

The disk groups can keep the recording of channels at different disks, it will improve the storage

efficiency.

The expired time is 0, it means the disk will be rewrite only when the disk is full .

----End

NOTE

Summary of Contents for N3NVR Series



























































































































































































































Search results

Summary of Contents for N3NVR Series

Reviews:

Related manuals for N3NVR Series

Brands by name

Popular brands

Northern N3NVR Series, User Manual

Search results

Summary of Contents for N3NVR Series

Reviews:

Related manuals for N3NVR Series

Brands by name

Popular brands