Northern N3NVR Series User Manual Download Page 107

Page: 107 / 218

Network Video Recorder

UI System Setting

User Manual

Issue: V4.6.X(2022-04-24)

Figure 7-36

Network management screen

7.4.1

Network

Set

DHCP a

DNS

manually or automatically.

7.4.1.1

Operation Steps

Step 1

Click

next to

DHCP

to enable or disable the function of automatically getting an IP

address. The function is disabled by default.

Step 2

If the function is disabled, click input boxes next to

Subnet mask

, and

Gateway

to set

the parameters as required.

Step 3

Click

next to

Obtain DNS Automatically

to enable or disable the function of

automatically getting a DNS address. The function is enabled by default.

Step 4

If the function is disabled, click input boxes next to

DNS 1(default 192.168.0.1)

and

DNS

2(default 8.8.8.8)

, delete original address, and enter a new address.

Step 5

Click

to save IP settings.

----End

Summary of Contents for N3NVR Series



























































































































































































































Search results

Summary of Contents for N3NVR Series

Reviews:

Northern N3NVR Series, User Manual, Page: 107 / 218

Search results

Summary of Contents for N3NVR Series

Reviews: