Northern Modular Telephone, User Manual, Page: 13 / 47

• • • • 10 • • • •
Special features
Call Pickup (for M-1)
Using Call Pickup, you can answer a ringing telephone from any telephone in your Pickup Group or
another Pickup Group.
To answer a ringing call in your own Call Pickup group:
1.
Lift the handset.
2. Press
ƒ
, or enter the SPRE code plus
‹
, or enter the Pick Up Ringing Number FFC.
To answer a ringing call in another Call Pickup group:
1.
Lift the handset.
2. Press
‘
, or enter the SPRE code plus
·›
, or enter the Pick Up Group FFC.
3. Dial the pickup group number of the ringing telephone.
To answer a ringing call at a specific extension in any pickup group:
1.
Lift the handset.
2. Press
ß
or enter the SPRE code plus
·fi
, or enter the Pick Up DN FFC.
3. Dial the extension number of the ringing telephone.
Call Pickup Network Wide
This feature enables the following functionalities to be extended over a network. Feature operation
does not change when extended across the network. To operate these features, see the information
for the features in this guide.
• Ringing number pickup
• Directed Call Pickup by Group Number
• Directed Call Pickup by DN
• Display Call Pickup
Ringing Number Pickup
To answer a call in your Call Pickup group:
1. Lift the handset.
2. Dial SPRE + 3 or PURN FFC.
3. You are connected to the call.
Directed Call Pickup by Group Number (Group Pickup)
To answer a call in another Call Pickup group from a telephone:
1. Lift the handset, or press a Directory Number key.
•
The Directory Number key is lit (if pressed.)
2. Press the GPU key or dial SPRE + 94 or dial PUGR FFC.
•
The GPU key is lit (if pressed)
3. Dial the pickup group number.
•
You are connected to the call.