background image

i

Meridian 1

Meridian Modular Telephone User Guide

This Nortel documentation is protected by copyright. It may not be copied in any form or medium except pursuant to the
Nortel License to Copy Documentation ("License").

If a License has been purchased, it will be enclosed with this copy of Nortel documentation.

Information is subject to change without notice. Northern Telecom reserves the right to make changes in design or
components as progress in engineering and manufacturing may warrant.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the
FCC rules, and the radio interference regulations of Industry Canada.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.

This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at their own expense.

SL-1 and Meridian 1 are trademarks of Northern Telecom.

© 1998 Northern Telecom

All rights reserved

Copyright Information

Summary of Contents for Modular Telephone
















































Reviews: