Page 14 of 19
Using the Manual Grease Gun
This air-powered grease gun can be used as a manual grease gun with the manual handle.
•
Remove the gun body from the tube container by turning it counter-clockwise. See Figure 18.
•
Fill the tube container with grease by following the Grease Loading instructions.
•
Attach the manual handle (#24) to the tube container by turning it clockwise. Make sure that the
manual handle is mounted onto the container tube tight and secure. See Figure 19.
•
Pull up and then depress the lever of the manual handle to inject a small amount of grease.
Repeat until more the desired amount of grease is emitted.
Figure 18
Figure 19
After Each Use
⚠
WARNING
•
After each use, disconnect from air supply and store in a safe, dry, childproof location.
•
Clean leftover grease from the tube container (#19) after each use.
•
Clean the fill nozzle (#12) and the tip (#10a) of dirt, grease, or debris.
•
Clean the entire grease gun with a cloth.
Maintenance
⚠
WARNING
•
The grease gun may still have air pressure after disconnected from air supply. Point the grease gun
into a suitable receptacle and fire it until all the air in the grease gun has been expended.
