Making calls / 53
P0881596 Issue 02
Compact ICS 4.0 System Coordinator Guide
Choosing a line using a line button
You have one line button for each line assigned to your
telephone. Press the line button to select the line you want to
answer or use to make a call. Having several line buttons
allows you immediate access to more than one line.
The M7100 telephone has two intercom paths which are used
instead of line buttons to answer and make calls. Each M7100
can be assigned two lines. You can press
˙ to switch
between two calls, one active and one on hold.
You have entered the number of a telephone
that is not in service.
The telephone you have called is on another
call. Press
LATER
to use the Ring Again or
Message features.
The call you are trying to make has been
restricted in programming. A possible reason
is time-of-day restrictions on certain calls.
Press
YES
to use Ring Again. Press
NO
to
send a message. See ‘‘Sending messages
using the display’’ on page 112 and ‘‘Turning
on Ring Again’’ on page 59.
Either you have no prime line, or the prime
line is in use, or the line programmed for an
autodial number, speed dial number, or
Hotline is in use. Select a line and dial again.
Press
YES
to send a message. See
Messages.
For other displays, see ‘‘Common feature displays’’ on page 215.
Not in service
On another call
LATER
Restricted call
Ring Again?
YES
NO
EXIT
Select a line
Send message?
YES
NO
p0881596.book Page 53 Wednesday, November 18, 1998 4:50 PM
