94 / Transferring calls
Compact ICS 4.0 System Coordinator Guide
P0881596 Issue 02
Parking a call
ƒ‡›
You can suspend a call so that it can be retrieved from any
telephone in your system.
1. Press
ƒ‡›.
2. Use the Page feature (
ƒfl‚) or press
PAGE
to
announce the retrieval code displayed by your telephone.
Retrieving a parked call
1. Select an internal line. (On the M7100 telephone, pick up
the receiver.)
2. Dial the Call Park retrieval code.
Using Call Park
When you park a call, the system assigns one of nine codes for
the retrieval of the call. These codes consist of the Call Park
prefix, which may be any digit from 0 to 9, and a two-digit call
number between 01 and 09. For example, if the Call Park
prefix is 4, the first parked call is assigned Call Park retrieval
code 401.
The Norstar system assigns Call Park codes in sequence, from
the lowest to the highest, until all the codes are used. This
round-robin approach means that a greater variety of codes are
used, which makes it easier for a call to reach the right person
when more than one incoming call is parked.
The highest call number (the Call Park prefix followed by 09)
is used only by telephones or devices connected to the system
using an analog terminal adapter (ATA).
p0881596.book Page 94 Wednesday, November 18, 1998 4:50 PM
