Northern Meditec Crius V6, Operator'S Manual

Page: 87 / 182

87 / 182
RSBI
Rapid shallow breathing index - quotient between fspn and TVe
spn (measured in liters).
Ptracheal
Pressure tracheal.
Poutput Pressure output.
Pambieat Pressure ambieat.
FiO2
The percentage of oxygen in the patient’s inspired gas.
FiO2 Cal Oxygen concentration calculation shows values
FiO2 measu Oxygen concentration monitoring actual value
EtCO2 The concentration of CO
2
measured at the end of expiration.
FiCO2
The concentration of CO
2
measured at the end of Inspiration.
awRR Patients with respiratory rate
PIF Inspiratory flow.
PEF Expiration flow.
P0.1
The occlusion pressure drop in the first 100 ms when the
patient starts spontaneous breathing.
6.9 Enter Standby Status
Press the [ Standby ] key. Standby status commences after your confirmation.
WARNING

To prevent possible patient injury due to lack of ventilatory support, secure alternative
ventilation for the patient before entering the Standby status. You must confirm that no
patient is attached before entering Standby status.

To prevent possible patient injury or damage to breathing circuit from overheated gas,
turn off the humidifier before entering the Standby status.
6.10 Turn the System off
Press the key in Standby or non-standby status, pop-up prompt window select OK, 5s
countdown end, the system automatically shut down.