Northern Meditec Crius V6, Operator'S Manual

Page: 43 / 182

43 / 182
3.8 Install the O2 Sensor
CAUTION

To reduce the risk of explosion, do not burn the O2 cell or force the cell open.
A. Main unit air inlet grille B. O
2
sensor C. O
2
sensor connection cable
1. Rotate the O
2
sensor clockwise to install it.
2. Push the O
2
sensor and its fixing seat into the ventilator.
3. Connect the O
2
sensor connection cable.
4. Close the main unit air inltet grille.
CAUTION

Ensure that the gas cylinder is equipped with pressure-reducing valve.
A
B
C