Northern Meditec Crius V6, Operator'S Manual

Page: 37 / 182

37 / 182
3.4 Install the Support Arm
A. Fixing block knob B. Fixing block C. Tube hook
D. Support arm joint E. Support bar F. Support arm joint
G. Support arm joint
1. Loosen the fixing block knob. Place the fixing block onto the handle on the side of
the ventilator.
2. Tighten the fixing block knob.
WARNING

To prevent possible patient injury due to accidental extubation, check the support arm
joints and the connection security as necessary.
A
G
F
E
D
C
B