NorthEast Monitoring, Inc. NEMM048-Rev-G
Page 18 of 21
DR400 User Manual
Appendices: Appendix F: EMC Information
Appendix F: EMC Information
Attention should be paid to the following EMC
information prior to installing or using the
Northeast Monitoring DR400 Recorder device.
•
Portable and mobile Radio Frequency
(RF) communication equipment may
interfere with the operation of the device.
•
The device has been tested and found to
comply with IEC/EN 60601-1-2.
•
Computers, cables and accessories not
tested to 60601-1-2 may result in increased
emissions or decreased immunity of the
device.
•
Verify normal operation if utilizing the
device adjacent to or stacked with other
electrical equipment.
Guidance and manufacturer’s declaration – electromagnetic emissions
The Northeast Monitoring DR400 Recorder is intended for use in the electromagnetic environment
specified below. The customer or user of the Northeast Monitoring DR400 Digital Recorder should ensure
that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment –
guidance
RF emissions CISPR 11
Group 1
Northeast Monitoring DR400
Digital Recorder uses RF energy
only for its internal function.
Therefore, its RF emissions are
not likely to cause any in nearby
electronic equipment.
RF emissions CISPR 11
Class B
Northeast Monitoring DR400 Dig-
ital Recorder is suitable for use in
all establishments other than
domestic and those directly con-
nected to the public low-voltage
power supply network that sup-
plies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage Fluctuations/flicker
emissions IEC 61000-3-3
Not applicable